Loading... Please wait...

CMC PT-130 Hydraulic Electric Tilt Trim with Gauge 13001

Price:
$987.20
SKU:
CMC13001
Brand:
CMC
Condition:
New
Availability:
Ships in 1-2 business days
Quantity:


Product Description

CMC PT-130 Hydraulic Electric Tilt Trim with Gauge 13001

PT-130 Tilt trim with gauge Features:

  • This Hydraulic Tilt and Trim 13001 unit rated for 130 HP and smaller outboard engines.
  • Provides 6" Set Back to Enhance Boat Stability and Performance.
  • 20 degrees of trim and a total of 90 degrees of tilt and trim on the transom.
  • Fabricated from 1/2 inch 6061 T6 extruded aluminum and attached with stainless steel fasteners.
  • 4 stainless steel motor mounting bolts included.
  • This CMC Electric Hydraulic Tilt and Trim Unit 13001 is easily adjustable from top or bottom.
  • The boater can then move the engine up and down as well as tilting it in and out with the power tilt and trim.
  • This PT-130 with gauge comes with all the necessary electrical components for installation are included.
  • It will come with everything you will need, full of fluid, tested and ready for operation. It includes the wire assembly (with relays circuit breaker and fuse), switch, motor mounting bolts and owner's manual. If your motor has clamps that tighten inside of the splash well, you will need to also purchase the 13022 transom clamp adapter.

Hydraulic System Features:

  • This CMC Hydraulic Tilt and Trim 13001 Totally waterproof!
  • The marine electric hydraulic system of this Hydraulic Tilt and Trim unit 13001 is made of 100% non-ferrous material for corrosion resistance in any water.
  • The Hydraulic actuator of this Hydraulic Tilt and Trim unit is completely self contained with its own fluid reservoir. 
  • The Hydraulic tank and hoses inside the boat are not necessary.
  • 40% more lifting capacity than other transom tilt trim units on the market.
  • Quality control guaranteed by computer aided design and precision machining.
  • This Hydraulic Tilt and Trim 13001 unit provides better fuel efficiency.
  • Get this item for your convenience.
  • View more information: PT-130 Tilt Trim Catalog       

 Note: clamp-on motors need an adapter #13022
If your outboard bolts directly to the transom of your boat, this adapter is not required.

Tilt and Trim Gauge Features:

  • Provides safe and convenient height determination.
  • Includes an up down toggle switch as standard equipment.
  • Sealed and drip proof and mounts in dash.
  • Standard 2 inch mount gauge.
  • Click on this link from America Today to see the PT-130 in Action!!!!! PT-130 Video

 PT-130 DIMENSION:

PT-130 Dimension

 

 REMINDER:

  • We ship CMC orders from Monday to Thursday (until 1:00 P.M Central Time) except Friday to Sunday orders will be shipped on Monday. 
  • We accept orders within the USA and international. Please Email Us for a less expensive alternative to UPS.

 


Warranty Information

WARRANTY AND SALES POLICY























LIMITED WARRANTY







CMC Marine, Inc. warrants to the first retail purchaser of its products that CMC Marine, Inc. will replace or repair the product, at its sole discretion, if any defects in material or workmanship are reported within the applicable warranty periods set out below from the date of the first retail purchase, subject to the remedies, exclusions, and limitations in this Limited Warranty. This limited warranty is effective for all CMC Marine, Inc. products purchased after January 1, 2007.







1. CMC hydraulic jack plates, CMC Tilt & Trim units: Hydraulic Actuator mechanism - 1 year







2. CMC hydraulic jack plates, manual jack plates and CMC Tilt & Trim units: frame structure assembly ÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´å_ÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊ 5 years







3. All other CMC Marine, Inc. Products: 1 year







Other Limitations:







EXCEPT AS SET FORTH HEREIN, THERE ARE NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, PROVIDED BY CMC MARINE, INC. ON THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE EXPRESSLY EXCLUDED. CMC MARINE, INC. FURTHER DISCLAIMS ANY LIABILITY FOR ECONOMIC LOSS ARISING FROM CLAIMS OF PRODUCT FAILURE, NEGLIGENCE, DEFECTIVE DESIGN, MANUFACTURING DEFECT, FAILURE TO WARN AND/OR INSTRUCT, LACK OF SEAWORTHINESS, AND ANY OTHER THEORY OF LIABILITY NOT EXPRESSLY COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY.







TO THE EXTENT REQUIRED BY LAW ANY IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THE RESPECTIVE EXPRESS LIMITED WARRANTIES STATED HEREIN. TO THE EXTENT ALLOWED BY LAW NEITHER CMC MARINE, INC., NOR THE SELLING DISTRIBUTOR, NOR THE SELLING RETAILER SHALL HAVE ANY RESPONSIBILITY FOR LOSS OF USE OF THE PRODUCT OR THE BOAT, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR INCIDENTAL AND CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT BE APPLICABLE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT BE APPLICABLE. THIS WARRANTY GIVES THE OWNER SPECIFIC LEGAL RIGHTS, AND THE OWNER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.







Sole Remedy:







In no event shall any repair or replacement under this Limited Warranty exceed the fair market value of the product as of the date of the ownerÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_s claim. THE REMEDY OF REPAIR OR REPLACEMENT OF PARTS OR MATERIALS FOUND TO BE DEFECTIVE IN FACTORY MATERIALS OR WORKMANSHIP COVERED BY THIS LIMITED WARRANTY SHALL CONSTITUTE THE OWNERÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_S SOLE AND EXCLUSIVE REMEDY AGAINST CMC MARINE, INC. FOR ANY CLAIMS WHATSOEVER OF ECONOMIC LOSS RESULTING FROM PRODUCT FAILURE.







Acceptance of any product returned or any refund provided by CMC Marine, Inc. shall not be deemed an admission that the product is defective. Products that are replaced become CMC Marine, Inc.ÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_s property. The terms and conditions contained in this limited warranty may not be modified, altered or waived by any action, inaction, or representations, whether oral or in writing, except upon the express, written authority of a management level employee of CMC Marine, Inc..







Exclusions:







This Limited Warranty does not apply to the following items:







Any CMC Marine, Inc. products used in other applications than on pleasure boats, including but not limited to non-marine use or use on boats which are utilized for racing or commercial purposes.







Ancillary equipment used or associated with CMC Marine, Inc. products, including but not limited to, batteries, fuses, switches, wiring, electric light bulbs, lamps, or sealed beam units.







Any product damaged by accident, acts of nature, improper installation, unreasonable or improper use, lack of proper maintenance, unauthorized repairs or modifications, abuse, normal wear or tear, or other causes not arising from defects in materials or workmanship.







Any expenses involved in the removal, reinstallation, or transportation of the product.







Any product damaged by the failure of the owner to use, maintain, or store the product as specified in any instructions.







Any product with discoloration or failure due to solar or chemical exposure.







Any defect or repair requiring redesign of the CMC Marine, Inc. product, except pursuant to the recall provisions of the United States Federal Boat Safety Act of 1971 or the recall laws of any other foreign jurisdiction.







OwnerÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_s Obligations:







It is the responsibility of the purchaser to return the product, with proper prior authorization, to CMC Marine, Inc. at the address below, postage pre-paid, and insured with proof of original purchase including date.







CMC Marine, Inc.







3920 South 13th Street







Duncan, OK 73533







Phone: 580-252-1699







For Warranty Requests:







Phone: 580-252-1699







Fax: 580-252-2970







Normal business hours: Monday through Thursday, 7:00am to 5:00pm CST







Additional CMC Limited Warranty Terms:







This warranty means that only the parts that prove defective during the period of warranty will be repaired or replaced at our option. CMC Marine will accept only parts returned for warranty prepaid from the initial purchaser and return the repaired or replaced parts freight collect.







A return authorization number (RMA) must be issued from the factory prior to the return of defective parts. An authorization number can be requested through the internet, or by contacting customer service by phone.







Avoid tampering with the Hydraulic Actuator if a warranty claim is to be made. The warranty is void on any hydraulic actuator returned that shows signs that it has been dismantled or electrical cord set from the motor has been cut.







There are no warranties which extend beyond the description on the face hereof. No one has authority to make any representations concerning the operation of CMC units except those made in writing by CMC Marine, Inc.







This warranty does not apply for any racing applications or if damage occurs because of accident, improper handing or operation, abuse or misuse.







All liability for any incidental or consequential damage is expressly excluded from this warranty.







In order to obtain the benefit of this warranty and agreement, the warranty card found in the centerfold of the product manual must be completely filled out and mailed within 30 days to CMC Marine, Inc.







***** ***** ***** ***** ***** ***** ***** ***** ***** *****


Categories

Our Newsletter


Add to Wish List

Click the button below to add the CMC PT-130 Hydraulic Electric Tilt Trim with Gauge 13001 to your wish list.

You Recently Viewed...