Loading... Please wait...

CMC PL-65 10" Set-Back High Speed Hydraulic Jack Plate 61302

Price:
$1,971.50
SKU:
CMC61302
Brand:
CMC
Condition:
New
Availability:
Ships in 1-2 business days
Quantity:


Product Description

PL-65 High Speed Hydraulic Jack Plate 10" Set-Back 61302

 

 

hydraulic unit

PL-65 High Speed Hydraulic Jack Plate 61302-Hydraulic Actuator Features:

  • Power-lift of this CMC Hydraulic Jack Plate 61302 is Totally waterproof!
  • Marine electric hydraulic system is made of 100% non-ferrous material for corrosion resistance in any water.
  • The hydraulic actuator of this CMC Hydraulic Jack Plate 61302 is completely self-contained with its own fluid reservoir (hydraulic tank and hoses inside the boat are not necessary).
  • The magnet motor of this CMC Hydraulic Jack Plate 61302 is permanent for additional power and R.P.M.
  • The 2" diameter cylinder within the actuator has twice the lifting capacity than most other transom jack plates on the market.
  • This Hydraulic Jack Plate 61302 removes vibration and shimmy due to loads applied from high power boat motor.
  • This Hydraulic Jack Plate is easily adjustable from top or bottom.

PL-65 High Speed Jack Plate 10" setback Features:

Features Of Patented Hydraulic High Speed Power-Lift

*New* Full Stroke in 8 seconds!

  • A TOTAL OF 8" OF POSSIBLE ADJUSTMENT!
  • Increases fuel efficiency.
  • Made for V-6 and smaller outboard motors applications.
  • Gives 5 inches of vertical travel
  • Provides 10 inches of setback from the boat transom.
  • With 1-1/2" of adjustment on the motor bracket and 1-1/2" of adjustment on the transom bracket.
  • Made of 3/4 and 1/2 inch 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners.
  • Great for fresh or salt water use. No welds or castings to break.
  • Designed to fit standard B.I.A. bolt pattern without drill holes or making modifications in the boat or motor
  • All the necessary mounting hardware are included.
  • It also can be purchased with stainless steel motor rails, Model PL-65SS (for V-8 motors 300 HP MAX).
  • Hydraulic jack plates are useful when it is necessary to get a boat on or off plane in shallow waters.
  • More information: PL-65 CATALOG
  • Get this item for your convenience.

NOTE: We recommend using boat transom washer plates if you plan to mount a V6 or larger outboard motor. The CMC transom washer plates can eliminate embedding of bolt heads into the transom by more evenly distributing loads on high performance engine.

 

See the side view of PL-65 HS Jack Plate 10 inch setback

REMINDER:

  • We ship CMC orders from Monday to Thursday (until 1:00 P.M Central Time) and Friday to Sunday orders will be shipped on Monday. 
  • We accept orders within the USA and international. Please Email Us for a less expensive alternative to UPS.

Warranty Information

WARRANTY AND SALES POLICY























LIMITED WARRANTY







CMC Marine, Inc. warrants to the first retail purchaser of its products that CMC Marine, Inc. will replace or repair the product, at its sole discretion, if any defects in material or workmanship are reported within the applicable warranty periods set out below from the date of the first retail purchase, subject to the remedies, exclusions, and limitations in this Limited Warranty. This limited warranty is effective for all CMC Marine, Inc. products purchased after January 1, 2007.







1. CMC hydraulic jack plates, CMC Tilt & Trim units: Hydraulic Actuator mechanism - 1 year







2. CMC hydraulic jack plates, manual jack plates and CMC Tilt & Trim units: frame structure assembly ÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´å_ÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊ 5 years







3. All other CMC Marine, Inc. Products: 1 year







Other Limitations:







EXCEPT AS SET FORTH HEREIN, THERE ARE NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, PROVIDED BY CMC MARINE, INC. ON THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE EXPRESSLY EXCLUDED. CMC MARINE, INC. FURTHER DISCLAIMS ANY LIABILITY FOR ECONOMIC LOSS ARISING FROM CLAIMS OF PRODUCT FAILURE, NEGLIGENCE, DEFECTIVE DESIGN, MANUFACTURING DEFECT, FAILURE TO WARN AND/OR INSTRUCT, LACK OF SEAWORTHINESS, AND ANY OTHER THEORY OF LIABILITY NOT EXPRESSLY COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY.







TO THE EXTENT REQUIRED BY LAW ANY IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THE RESPECTIVE EXPRESS LIMITED WARRANTIES STATED HEREIN. TO THE EXTENT ALLOWED BY LAW NEITHER CMC MARINE, INC., NOR THE SELLING DISTRIBUTOR, NOR THE SELLING RETAILER SHALL HAVE ANY RESPONSIBILITY FOR LOSS OF USE OF THE PRODUCT OR THE BOAT, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR INCIDENTAL AND CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT BE APPLICABLE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT BE APPLICABLE. THIS WARRANTY GIVES THE OWNER SPECIFIC LEGAL RIGHTS, AND THE OWNER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.







Sole Remedy:







In no event shall any repair or replacement under this Limited Warranty exceed the fair market value of the product as of the date of the ownerÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_s claim. THE REMEDY OF REPAIR OR REPLACEMENT OF PARTS OR MATERIALS FOUND TO BE DEFECTIVE IN FACTORY MATERIALS OR WORKMANSHIP COVERED BY THIS LIMITED WARRANTY SHALL CONSTITUTE THE OWNERÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_S SOLE AND EXCLUSIVE REMEDY AGAINST CMC MARINE, INC. FOR ANY CLAIMS WHATSOEVER OF ECONOMIC LOSS RESULTING FROM PRODUCT FAILURE.







Acceptance of any product returned or any refund provided by CMC Marine, Inc. shall not be deemed an admission that the product is defective. Products that are replaced become CMC Marine, Inc.ÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_s property. The terms and conditions contained in this limited warranty may not be modified, altered or waived by any action, inaction, or representations, whether oral or in writing, except upon the express, written authority of a management level employee of CMC Marine, Inc..







Exclusions:







This Limited Warranty does not apply to the following items:







Any CMC Marine, Inc. products used in other applications than on pleasure boats, including but not limited to non-marine use or use on boats which are utilized for racing or commercial purposes.







Ancillary equipment used or associated with CMC Marine, Inc. products, including but not limited to, batteries, fuses, switches, wiring, electric light bulbs, lamps, or sealed beam units.







Any product damaged by accident, acts of nature, improper installation, unreasonable or improper use, lack of proper maintenance, unauthorized repairs or modifications, abuse, normal wear or tear, or other causes not arising from defects in materials or workmanship.







Any expenses involved in the removal, reinstallation, or transportation of the product.







Any product damaged by the failure of the owner to use, maintain, or store the product as specified in any instructions.







Any product with discoloration or failure due to solar or chemical exposure.







Any defect or repair requiring redesign of the CMC Marine, Inc. product, except pursuant to the recall provisions of the United States Federal Boat Safety Act of 1971 or the recall laws of any other foreign jurisdiction.







OwnerÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«Ì´åÌÎÌ_Ì´åÇÌÎÌ_Ì´åÇÌÎå«ÌÎÌÊÌÎå«_s Obligations:







It is the responsibility of the purchaser to return the product, with proper prior authorization, to CMC Marine, Inc. at the address below, postage pre-paid, and insured with proof of original purchase including date.







CMC Marine, Inc.







3920 South 13th Street







Duncan, OK 73533







Phone: 580-252-1699







For Warranty Requests:







Phone: 580-252-1699







Fax: 580-252-2970







Normal business hours: Monday through Thursday, 7:00am to 5:00pm CST







Additional CMC Limited Warranty Terms:







This warranty means that only the parts that prove defective during the period of warranty will be repaired or replaced at our option. CMC Marine will accept only parts returned for warranty prepaid from the initial purchaser and return the repaired or replaced parts freight collect.







A return authorization number (RMA) must be issued from the factory prior to the return of defective parts. An authorization number can be requested through the internet, or by contacting customer service by phone.







Avoid tampering with the Hydraulic Actuator if a warranty claim is to be made. The warranty is void on any hydraulic actuator returned that shows signs that it has been dismantled or electrical cord set from the motor has been cut.







There are no warranties which extend beyond the description on the face hereof. No one has authority to make any representations concerning the operation of CMC units except those made in writing by CMC Marine, Inc.







This warranty does not apply for any racing applications or if damage occurs because of accident, improper handing or operation, abuse or misuse.







All liability for any incidental or consequential damage is expressly excluded from this warranty.







In order to obtain the benefit of this warranty and agreement, the warranty card found in the centerfold of the product manual must be completely filled out and mailed within 30 days to CMC Marine, Inc.







***** ***** ***** ***** ***** ***** ***** ***** ***** *****

Find Similar Products by Category



Categories

Our Newsletter


Add to Wish List

Click the button below to add the CMC PL-65 10" Set-Back High Speed Hydraulic Jack Plate 61302 to your wish list.

You Recently Viewed...